Multus SDR,LLC


Proficio

$235.95

The Proficio is the next generation of Transceivers. It is an all band version (160M - 10M) of the Basic It has all the features of the current Basic:
•96kHz digital I/Q interface. No additional sound card needed.
•Two tone, 2 kHz spacing, third-order dynamic range: 99 dB.
•Support for Elecraft T1 automatic antenna tuner.
•External Amplifier control via AMP port.
•CW Key Jack.
•DG8SAQ/PE0FKO/SoftRock control interface.
•Open Source firmware.
•Firmware Field Updates via on board USB bootloader.

With these additional features:

• All band.  The Proficio covers all bands from 160M to 10M.
• Enhanced receive.  A RF amplifier is now in the RF front end that provides about 19db of gain at 10M and tapers down to about 0db at 160M
• Receive Band Pass Filters for all band groupings (160M,80M,40M-60M,20M-30M,15M-17M,12M-10M)
• The same BPFs are used in conjunction with Low Pass Filters in the transmit path to provide a clean output.
• 5W Class A PA.  Clean output of 5W on all bands (slightly less on 160M and 10M).
• Real CW. Real internally (via firmware) generated CW. No latency issues as with other SDR transceivers. Iambic code generation and semi break-in modes are supported.

The Proficio is compatible with all host SDR applications that work with the Basic. The Proficio is supplied as a kit with all SMD devices installed.  The customer needs to install the thru hole components and four easy to wind inductors.

Specifications:
Receive:
Continuous from 1.8MHz to 30MHz. (Lower sensitivity below 1.8MHz and between amateur bands)
Sensitivity: MDS: Average -123db. (-125db on 10M. -121db on 160M) ( MDS performance specifications for amateur bands only.)
Transmit:
Power Output: 5W, 4W minimum (transmit permitted on amateur bands only)
Spurious Emissions: Meets or exceeds FCC requirements (-43db from carrier).

Technical support and documentation is located at: Support.
Please do not use this website to obtain technical support. Requests for technical support via this website will not receive a response.


Enclosure not included.

NOTE:
These kits are produced at time of order. There is a two day lead time before shipping the kit.

Add to Cart:

  • Model: V1 REV C


This product was added to our catalog on Thursday 07 July, 2016.

Your IP Address is: 54.156.92.46
Copyright © 2017 Multus SDR, LLC. Powered by Zen Cart